Spaceprom - каталог оборудования
Barometric pressure transducer The RPT 410 Resonant Silicon Pressure Transducer (RPT) utilizes Druck's resonant silicon technology that has been field proven in many applications in air data flight and test, precision portable and bench calibrators, and high performance wind tunnels. Druck's RPT 410 is ideally suited for weather...
Calibration bath CTR-80 The CTR-80 bath is the ideal unit for calibrating temperature sensors used in freeze dryers, freezers, and cryo units. Operating from -80 to 30°C, the CTR-80 brings fast response and high stability to your cold temperature applications. With a cool-down time of 120 minutes from ambient to -80°C,...
Chilled mirror dew-point hygrometer The OptiSonde Hygrometer offers precision humidity and temperature measurement. GE's proven chilled mirror sensing technology provides data which is traceable to global metrology and standards laboratories. - Compact and rugged design for easy installation and durability - Built-in data logger provides...
Chilled mirror dew-point transmitter Transmitters Dew-10 Series - GE General Eastern Description The Dew-10 Series is a family of low cost, high performance chilled mirror dew point transmitters comprising pipe, duct, and wall mount models. All models provide accurate and reliable dew point measurements over a wide range for energy management...
Combined oxygen (O2) and moisture analyzer Top Model of Moisture Analyzers The Moisture Image Series 1 (MIS 1) analyzer is the top-of-the-line model in GE Panametrics’ family of Moisture Series analyzers. This multifunction analyzer uses charts, graphs and windows to display any of six parameters (moisture, oxygen, temperature, pressure and...
Coriolis mass flow-meter All Rheonik Coriolis mass flow meters are manufactured to strictly controlled procedures and quality standards. The Rheonik range offers a wide variety of sizes, optimized to give accurate and reliable performance without compromise. The Omega tube Coriolis meter is one of the most versatile meters...
Data acquisition system Netpac® A system approach to premium, low cost process I/O The Netpac system is a distributed, industrial I/O network that provides the most cost effective data acquisition system available. - Reduced installation cost with prepackaged, hardened nodes - including enclosures and power supply -...
Dew-point analyzer MMY 2650 The MMY 2650 is a moisture analyzer designed to operate with the General Eastern DY 5 planar gold aluminum oxide dew point sensor. The unit offers an optional input that can be used for pressure compensation, an external temperature probe, or any other sensor this input can be configured to...
Dew-point transmitter The DewPro MMY 30 is a loop-powered dew point transmitter for analyzing moisture content in dessicant air dryers, pipeline natural gas and industrial gases. The 4-20 mA output measures dew point temperature or ppm in gases at line pressure or atmospheric pressure. - Simple loop-powered 4-20 mA connection -...
Differential low pressure sensor LPM 5000 Series Low differential pressure sensor (voltage) - Ranges form ±0.2 inH2O to ±150 psid - Output 0-5Vdc; 0-10Vdc; ±2.5Vdc; ±5Vdc - Accuracy ±0.25% FS BSL - Line pressure from vacuum to 600 psi - Aluminum and Beryllium copper wetted material - Unidirectional or bidirectional - Variable...
Differential pressure transmitter with digital output Smart/HART® Differential Pressure Transmitter - STX 2100 Series The STX 2100 Series Differential Pressure Transmitter complements the STX 2000 Series, providing a complete family of Smart gauge, absolute and differential units. - ± 0.1% accuracy - Ranges from 3.75mbar to 20 bar - 16:1 rangeability -...
Digital precision pressure indicator Precision Barometic Indicator - DPI 142 The DPI 142 is a high accuracy barometric indicator with digital communications suitable for integration into any datalogging or integrated information system. It provides highly accurate readings using the a resonant pressure sensor to better than 0.01% FS over...
Digital precision pressure indicator Introducing a new high precision Druck pressure indicator, designed for test bench, bench top and panel mount calibration, test and monitoring applications. The new PACE1000 precision pressure indicator brings together the latest measurement technology from GE to offer an elegant, fast, flexible and...
Digital precision pressure indicator Precision Pressure Indicator - DPI 150 The DPI 150 provides an accurate yet economical digital pressure indicator. It is available in various pressure ranges from as low as 0 to 10 inH2O up to 3000 psi (25 mbar to 200 bar) and provides an accuracy to 0.01% Full Scale over 18°C to 28°C. For higher ranges,...
Digital pressure gauge The Druck DPI 104 is a microprocessor controlled digital pressure gauge that combines precision and functionality in a compact, robust, and simple to use package. Advanced silicon technology delivers 0.05% accuracy over ranges to 20,000 psi, making the DPI 104 suitable for a wide array of pressure...
Digital pressure indicator Modular Pressure Controller/Indicator A new generation of modular, high precision Druck pressure controllers & indicators, designed for ATE and test bench applications. Features • A new generation of pressure controllers & indicators designed on a modular platform • Utilises GE’s...
Digital pressure indicator The PACE5000 Modular Pressure Controller/Indicator First in a new generation of modular, high precision Druck pressure controllers/indicators, designed for ATE and test bench applications Features • First of a new generation of pressure controllers & indicators designed on a modular platform •...
Digital pressure transducer DPS 4000 CANbus Digital Output Pressure Transducers The DPS 4000 Series is a state of the art range of digital output pressure transducers featuring a CANbus serial communications interface. Ranges from 5 psi to 1000 psi High accuracy over wide temperature range Full CAN version 2.0B CANopen protocol...
Dry-block temperature calibrator Temperature Dry Wells (-40 to 400°C) The HTR and LTR Series temperature references are dry wells specifically designed to fully automate sensor calibration when used with GE Kaye validation software and traceable temperature standards. Both the HTR and LTR series models feature fast heat up and...
Environmental monitoring system LabWatch™ The LabWatch™ environmental monitoring system is a complete solution for critical stability, environmental, and facility monitoring applications. Designed specifically for pharmaceutical and biotechnology applications, LabWatch integrates high quality GE Kaye sensors and I/O hardware with...
Explosion proof digital pressure gauge DPI 104-IS Intrinsically Safe Digital Test Gauge The DPI 104-IS is an intrinsically safe version of the microprocessor-controlled DPI 104 digital pressure gauge. This instrument combines precision and functionality in a compact, robust and simple to use product. Advanced technology delivers 0.05% FS...
Explosion proof relative pressure transmitter The PTX 1240 industrial pressure transmitter has been designed for use with aggressive pressure media found in many industrial and process applications. The fully welded 316L stainless steel pressure module ensures excelent media compatibility without compromising performance of Druck's micromachined...
Flare gas ultrasonic flow-meter Improves Efficiency- Now with extended Range The GF868 flare gas flowmeter improves the efficiency of petrochemical plants, refineries and offshore platforms. It uses a proprietary algorithm to determine instantaneously the molecular weight and mass flow rate of the flare gas. The meter is used to...
Flue gas oxygen (O2) analyzer Accurate Monitoring of Combustion Processes The Series 300 microprocessor-based flue gas analyzer provides continuous and accurate monitoring of all types of combustion processes, from simple boilers to specialized heat-treatment furnaces. It uses a proven zirconium-oxide oxygen sensor and a catalytic...
Flue gas oxygen (O2) analyzer Economical Solution for Multiple Applications The FGA311 is a low-cost, in situ, flue-gas oxygen transmitter. Its compact transmitter design incorporates the electronics and oxygen probe into one weatherproof or explosion-proof package. This microprocessor-based oxygen transmitter is designed to stay...
Flush diaphragm pressure transmitter PTX 600 Series Precision pressure transmitters For critical applications in industrial and research environments the PTX 600 series of two wire, 4-20mA output pressure transmitters improves upon the performance of previous models by offering new levels of stability, versatility and measurement accuracy...
Glass coated NTC bead thermistor NTC Beads - B05/07/10/14 Small glass coated bead thermistors on fine diameter platinum alloy lead-wires. NTC Beads - B35/43 Large glass coated bead thermistors on fine diameter platinum alloy lead-wires. NTC Beads - BB05/07/10/14 Miniature, uncoated bead thermistors on fine diameter platinum...
Glass encapsulated NTC thermistor NTC Diodes - TH This product is a thermistor chip that has been glass sealed in DHD type (double heat sink diode package). This construction results in a high reliability durable product. - Suitable for hostile environments - Low cost automated manufacturing - Reel tape available - Rugged NTC...
Hand-held digital pressure indicator DPI 705 Digital pressure indicator The Druck DPI 705 Series of handheld pressure indicators combine tough and rugged design with accurate and reliable pressure measurement. New materials and technical innovations from over fifteen years experience with portable pressure testers has resulted in this...
Hand-held digital pressure indicator Precision Pressure Indicator - DPI 740 The GE Infrastructure Sensing DPI 740 is a portable battery powered precision barometer, providing outstanding capabilities in a hand-held package. - Ranges to 103 inHg absolute - Accuracy: ±0.004 inHg absolute - 6 digit resolution LCD display - Multiple...
Hand-held pressure calibrator The DPI 880 is a lightweight and simple to use hand-held instrument that provides high accuracy measurement of electrical, temperature, pressure and flow parameters from a single device. The DPI 880 measures and sources milliamps, millivolts, volts, ohms, frequency, thermocouples, RTDs, pulses...
Hand-held thermo-hygrometer Pin type, non-invasive and hygrometer with data storage in one meter - The Protimeter Moisture Measurement System (MMS) Plus is a complete moisture measurement device for use in many different building related industries. The MMS combines pin type and non-invasive modes of measurement together with...
Hand-held thermo-hygrometer Psyclone Protimeter Thermo-Hygrometer The Protimeter Psyclone is a highly durable and functional hand held thermo-hygrometer designed to measure relative humidity and temperature in a wide range of environments and applications: - Disaster restoration - Indoor air quality - HVAC—efficiency monitoring -...
Hand-held thermometer, hygrometer and dew-point meter Versatile hygrometer that measures humidity, air temperature and dewpoint The Protimeter HygroMaster is an easy to use hygrometer with built in data logging capability. The HygroMaster is a hand-held instrument for taking spot measurements and for logging humidity and temperature values. Quick measurements...
High precision pressure sensor The new RPS/DPS 8000 resonant silicon pressure sensor is the first pressure sensor to incorporate GE’s TERPS technology platform. TERPS (Trench Etched Resonant Pressure Sensor) offers an order of magnitude greater performance over current technologies to provide the highest accuracy and stability sensor...
Humidity calibrator HumiTrace HumiTrace is the market-leading system for reliable and precise calibration of virtually any relativity humidity probe. Each HumiTrace humidity calibration standard is supplied with an INAB calibration certificate. This not only ensures that your instrumentation readings are accurate and...
Humidity generator and calibration system Used for Field Calibration The GE Panametricws MG101 hygrometer calibration system is used to generate precise, repeatable levels of water vapor in a carrier gas stream. This primary dew/frost point generation system achieves an accuracy of ±1°C within a continuously adjustable range. - Generates...
Humidity generator and calibration system GC-1 Humidity Chamber and Calibration System The large 4 cubic chamber offers NIST traceable calibration capabilities. The large volume chamber controlled by GE's chilled mirror technology offers RH instrumentation OEMs increased calibration volume capabilities and savings. Humilab The Humilab...
HVAC relative humidity and temperature transmitter HumiTrac™, GE's next generation relative humidity and temperature transmitter designed to serve the building automation/HVAC market, as well as a wide variety of general purpose relative humidity monitoring applications. All models incorporate a NIST traceable, field-replaceable sensor tip, a...
HVAC relative humidity and temperature transmitter Relative Humidity and Temperature transmitters for building automation control. Control of Relative Humidity can help prevent condensation in the building envelope and mechanical systems. Relative humidity can be used to increase comfort levels and save energy by reducing the need to heat or cool the...
Hydrostatic level sensor Submersible Level Probe, Corrosion-Resistant The Submersible Level Probe offers a reliable, accurate and economical solution to level measurement in a wide variety of applications. The new Submersible Level Probe has been developed to allow trouble free operation in tasks ranging from level measurement...
Hydrostatic level sensor The PDCR 1830/1840 transducer (mV output) and PTX 1830/1840 transmitter (4-20 mA output) are the latest generation of fully submersible high performance sensors for measurement of hydrostatic liquid levels.The combination of a high technology sensor, together with advanced signal conditioning and packaging...
Hydrostatic level sensor Field-proven Druck silicon technology is at the heart of the new platform, resulting in a range of high quality piezo-resistive pressure sensors, which are both robust and stable. High levels of performance have been achieved without the use of digital electronics, so that the sensors are particularly...
Insertion in-line vortex flow-meter GE’s PanaFlow MV82 in-line multivariable mass vortex flow meter is the next generation of vortex meters. PanaFlow MV82’s multivariable design consists of a vortex shedding velocity sensor, an RTD temperature sensor and a solid state pressure transducer that measures the mass fl ow rate of steam, gases...
Intrinsically safe dew-point transmitter The DewPro MMY 31 is a cost effective loop-powered transmitter designed for "in-line" installation where trace moisture measurement is required. The MMY31 mounts directly in the gas stream for applications including glove boxes, environmental chambers and test chambers. - Simple loop-powered 4-20...
Intrinsically safe loop calibrator UPS III IS - Intrinsically Safe Loop Calibrator The UPS-III-IS is an intrinsically safe loop calibrator, with its size making it rugged and extremely compact. It measures 3.5 in x 5.5 in x 1.7 in (90 mm x 140 mm x 42 mm) and weighs just 16.2 oz (460 g). It is an essential tool for loop testing, instrument...
Ion trap mass spectrometer (ITMS) Kaye Validator® ITMS The Kaye Validator® ITMS is a portable at-line instrument for accelerating the cleaning validation process. Operators can assess system cleanliness at-line with no delay, and get production lines up and running quickly. As an alternative to traditional analytical techniques, (HPLC...
Loop calibrator Smart mA loop calibrator The UPS-II can power (24 Vdc) and read 2-wire transmitters to perform field calibrations. Output currents are adjustable to a resolution of 10 microamps in both source and transmitter simulation modes. - Sources and reads milliamps - Powers and reads 2-wire transmitters -...
Low differential pressure transmitter LPM/LPX 1000 Series Ultra Low Differential Pressure Transmitter The LP 1000 Series wet/wet differential pressure transmitter is ideally suited for use in clean room HVAC monitoring and control. The device offers several improvements over traditional sensors such as user accessible damping, excellent...
Low differential pressure transmitter The Series T family of differential pressure transmitters measure low pressures and feature low power consumption and a variety of analog signal outputs. A wide selection of standard pressure ranges and electrical ratings is available. These transmitters feature: no moving parts to wear out, reliable...
Media isolated piezoresistive pressure sensor NPI-19 Low Pressure Sensor NPI media isolated sensors are designed to operate in hostile environments and yet give the outstanding sensitivity, linearity, and hysteresis of a silicon sensor. Features - Solid state, high reliability - 316L stainless steel, ISO sensor design - ±0.5% static accuracy -...
Media isolated piezoresistive pressure sensor NPI-12 Series Specifications The NPI-12 Series of solid state, media isolated pressure sensors are designed to provide a cost effective solution for applications that detect tube blockages and pump performance. The NPI-12 Series is intended to mount adjacent to flexible tubing to sense tube expansion. Cleanliness...
Media isolated piezoresistive pressure sensor NPI-15 Series Sensor NovaSensor Current Driven, Media Isolated, High Pressure Sensors incorporatestate-of-the-art IsoSensor technology, which gives the OEM user the best in price and performance. Features - Solid state, high reliability - High sensitivity, 200 mV typical FSO with 1.0 mA excitation -...
MEMS pressure sensor for medical applications NovaSensor’s NPC-100 Series pressure sensor is specifically designed for use in disposable medical applications. The device is compensated and calibrated per the Association for the Advancement of Medical Instrumentation (AAMI) guidelines for industry acceptability. The sensor integrates a high-performance,...
Miniature infrared temperature sensor Infrared (IR) Sensors Overview One of the most comprehensive ranges of products in the world today are offered in the category of measurement and sensing products driven by temperature technologies. These include high temperature thermistors, gauge drivers, sensors, and elements. GE Measurement &...
Miniature surface mount pressure sensor NPA Surface-Mount Pressure Sensor Series The NPA is a new family of OEM miniature pressure sensing products offering best in class performance for OEM applications in healthcare, industrial and transportation markets. Packaged in an industry standard surface mount SOIC14 pin package, the NPA Series...
Moisture meter for building surveying This unique Surveymaster moisture meter has two modes of operation - search and measure. Search and measure help the user to distinguish sub-surface from surface moisture, essential information when trying to establish the extent and cause of a dampness problem. Surveymaster is a moisture meter that...
Moisture meter for concrete Protimeter Aquant Non-Invasive Moisture Meter The Protimeter Aquant is used to assess and monitor the relative moisture level of building materials including plaster, drywall, masonry, concrete and fiberglass (GRP). It is ideal for checking the relative moisture condition of building elements such...
Moisture meter for gas Superior Performance The Moisture Monitor Series 35 (MMS 35) single-channel hygrometer combines our technologically advanced M Series moisture probe with state-of-the-art electronics for superior speed of response, stability and overall performance. - Absolute humidity measurement - 16-character,...
Moisture meter for grain Integrated moisture and temperature measurement. The Protimeter Grainmaster i is a highly versatile instrument to measure the moisture and temperature of crops. The meter is pre-programmed with 15 crop calibrations, each of which can be adjusted individually, if required, for matching with respect...
Moisture meter for natural gas GE’s Aurora analyzer uses tunable diode laser absorption spectroscopy (TDLAS) to measure moisture in natural gas rapidly and accurately. The analyzer is suitable for installation in hazardous areas and operates over a wide range of environmental conditions. Aurora’s fast response quickly alerts and...
Multi-function calibrator for electrical measuring instruments DPI 832 Dual Electrical Calibrator The DPI 800 Series is a complete range of advanced, robust and simple to use hand-held instruments. Highly cost effective, these tools are ideal for test/calibration of many popular process parameters. Advanced features and technical innovations address more applications...
Multi-function portable calibrator The DPI 880 is an ultra-compact and simple to use tool for testing, configuring and calibrating virtually all process parameters. It is 35% smaller than competitive models and it’s windows-like menu driven display means fewer keys and a more simple, easier-to-understand interface. The DPI 880’s data...
Multi-function portable calibrator (pressure, temperature, multifrequency) DPI 620 Series Advanced Modular Calibration System and HART® Communication System Modularity brings a whole new perspective to multi-function test instruments,calibrators and HART communicators. The DPI 620 Series uses three basic components to provide the multifunctionality to perform duties formerly...
Non-invasive clamp-on ultrasonic flow-meter for gas and steam CTF878 Clamp-On Flowmeter The GE Panametrics DigitalFlow™ CTF878 brings clamp-on ultrasonic gas flow metering capability to atmospheric pressure applications at velocities up to 150 ft/s (46m/s). The new CTF878 uses the correlation tag ultrasonic flow measurement technique to measure accurately and...
Non-invasive clamp-on ultrasonic flow-meter for gas and steam GE's GC868 flowmeter is a fixed-installation flowmeter comprised of the GC868 electronics, a pair of advanced clamp-on ultrasonic transducers, a clamping fixture, a preamplifier located near the transducers and coaxial cables to connect the transducers to the preamplifier and GC868 electronics....
Non-invasive clamp-on ultrasonic flow-meter for liquids The XMT868i liquid flow transmitter combines state-of-the-art flow measurement capability with a low-cost transmitter package that measures only 8.2 by 6.6 in (20.1 by 16.8 cm), weighs only 10 lb (4.5 kg) and can be installed right at the process measurement point. The all-digital XMT868i has no moving...
NTC chip thermistor NTC Chips - Leadless HM Top and bottom electroded, uncoated chip thermistors without leads - Low cost, solid state temperature sensor - Point matched at 25°C to ±5% to ±10% - Suitable for use over range of -80°C to +150°C - High sensitivity greater than -4% / °C at 25°C - Suitable for temperature...
NTC disc thermistor NTC Discs - CL Disc thermistor with uninsulated lead-wires. - Low cost solid state device for inrush current suppression - Excellent mechanical strength - Wide operating temperature range: -50°C to 175°C - Suitable for PCB mounting - Available as a standard with kinked leads and on tape and reel...
OEM pressure transmitter This flexible product is aimed at OEM manufacturers who require a high quality, cost effective pressure sensor, designed to meet their own specific application requirements at an economical cost. It is manufactured in high volumes using a standard “core” principle which readily enables variation of...
Oxygen analyser (O2) for harsh environment DF Series Oxygen Analyzers With the DF-300E family of oxygen analyzers, you have access to accurate, sensitive and rapid oxygen analysis in your application—with the flexibility to apply this technology across the broadest range of applications. DF-300E analyzers are used in everything from harsh and...
Oxygen gas transmitter (O2) Loop-Powered Transmitter The O2X1 is a small, two-wire, loop-powered oxygen transmitter with an advanced galvanic fuel-cell sensor and linear output. It is certified as intrinsically safe and weatherproof to NEC and CENELEC codes. - Measures oxygen from 1.0 ppm to 25 percent - Six field-programmable...
PCB-mountable piezoresistive pressure sensor NPC-1210 Series The NPC-1210 series of solid-state pressure sensors are designed to provide a cost effective solution for applications that require calibrated performance over a wide temperature range. Packaged in a dual-in-line configuration, the NPC-1210 Series is intended for printed circuit board...
PCB-mountable piezoresistive pressure sensor NPC-1220 Medium Pressure Sensor The NPC-1220 series of solid state pressure sensors are designed to provide a cost effective solution for applications that require calibrated performance over a wide temperature range Features - 50 mV full scale output (FSO) - ±0.1% accuracy - Interchangeable -...
PCB-mountable piezoresistive pressure sensor NPH Series Medium Pressure Sensor Features - Solid state, high reliability - Standard TO-8 package suitable for PC board mount - Low cost, small size - Available in gauge, absolute, and differential pressure versions - Media compatible with non-corrosive gases and dry air - Typical FSO 100...
Pin moisture meter for wood Advanced moisture meter for wood supplied with a temperature probe, pouch and moisture probe The Protimeter Timbermaster is a new simple to use moisture meter specifically designed for the timber industry. It is ideal for a range of quality control applications associated with the production, trading...
Portable dew-point analyzer The MMY245 Moisture Analyzer is a convenient, portable instrument that can quickly spot check the performance of gas dryers for compressed air, breathing air, and pure gas supplies. The planar capacitive sensor combines accurate dew point measurement with fast response time. The sensor is stored in...
Portable dry-block temperature calibrator FTR Series Temperature References Two portable dry well models provide a combined temperature range of -10 to 350 C - Model FTR 122 for temperature ranges from -10 to 122 C - Model FTR 350 for temperature ranges from 25 to 350 C - Compact 3 3/8" x 6" x 7 3/4" overall size - 10 to 12 minute heating...
Portable hygrometer The PM880 AC hygrometer is a complete, portable system with options and accessories to meet all industrial moisture measurement needs. This hygrometer is small, lightweight, and easy to use. The large LCD displays moisture readings in dew point (°C or °F), ppmv, ppmw, lb/MMSCF (natural gas), and a variety...
Portable moisture analyzer Internal Sample System Option The Moisture Monitor Series 35 IS (MMS 35 IS) portable hygrometer is certified intrinsically safe, is battery powered, and is housed in a damage-resistant case. When purchased with the internal sample system option, a built-in moisture probe and sampling system with process...
Portable non-invasive clamp-on ultrasonic flow-meter for gas Portable Clamp-On Gas Flowmeter The GE Panametrics’ TransPort PT878GC brings clamp-on ultrasonic gas flow metering capability to the portable level. Designed for natural gas pipeline, compressed air, inert gas or any compressed gas applications, the new PT878GC has the ability to measure gas flow rates,...
Portable non-invasive clamp-on ultrasonic flow-meter for liquids The TransPort PT878 flowmeter packs big features into a compact, light package. Its built-in datalogger can store more than 100,000 data points and up to 32 sets of site location parameters. You can add an optional built-in ultrasonic thickness gage. Temperature transducers are available for measuring...
Portable non-invasive clamp-on ultrasonic flow-meter for liquids Water, Wastewater & Sewage Applications GE Panametrics’ AquaTrans AT868 ultrasonic flowmeter combines state-of-the-art flow measurement capability with a rugged, low-cost transmitter package that can be installed right at the process measurement point. It is designed specifically for municipal applications...
Portable RTD-temperature calibrator RTD Indicator/RTD Loop Calibrator The DPI 800 Series is a complete range of advanced, robust and simple to use hand-held instruments. Highly cost effective, these tools are ideal for test/calibration of many popular process parameters. Advanced features and technical innovations address more applications...
Portable thermocouple temperature calibrator Thermocouple / Loop Calibrator The DPI 800 Series is a complete range of advanced, robust and simple to use hand-held instruments. Highly cost effective, these tools are ideal for test/calibration of many popular process parameters. Advanced features and technical innovations address more applications...
Pressure calibration hand pump Multi-function Pressure Generator/Hand Pump - PV 411 The PV411A is a high quality field proven pressure and vacuum hand pump providing functionality never before seen in a hand held pressure source.
Pressure calibration hand pump The PV212 is a high quality hand pump designed to quickly and easily generate hydraulic pressures. The materials of construction make it compatible with most fluid media and an optional seal kit can be supplied for many aggressive applications. The built-in vernier provides excellent control and is...
Pressure calibrator for aircraft DPI 610 Aero Version For aircraft leak testing of Pitot Static systems the DPI 610 Aero Version is a low cost yet flexible test instrument. Configured as a single channel unit for testing either altitude or airspeed parameters, the DPI 610 Aero provides manual pressure generation and venting facilities....
Pressure data-logger The ValProbe® system's wireless probe design eliminates the need for hard-wired sensors, simplifying access to hostile, remote or hard to reach environments. With it's broad operating range and ability to measure temperature, humidity and pressure, ValProbe is suitable for many process validation and...
Pressure sensor with amplified output PTX/PMP 3000 Series Amplified Output Aerospace Pressure Transducer The PTX/PMP 3000 Series of high level output pressure transducers use proven technology within flight certified hardware. Fully qualified to DO-160D, the modular construction of hte 3000 Series allows a wide selection of pressure ports,...
Pressure transmitter for corrosive environment Lift station submersible pressure transducer The 1290 Series pressure transmitter is similar to Druck's field proven submersible sensors with the exception of the pressure port. It is equipped with a flush teflon-coated elastomeric diaphragm that reduces the likelihood of grease or biosolids buildup....
Pressure transmitter with display Rangeable/Smart HART Pressure Transmitters - RTX 1000 Series Since 1972, Druck products have successfully applied technological innovation and application focus to a diverse and demanding world of pressure. Now part of GE Industrial Systems' Measurement & Sensing Technologies business, GE Druck manufactures...
PTC thermistor PTC Assemblies A range of PTC disc thermistors with insulated flexible wires and housed in an eyelet tag PTC Leaded Discs Surface mount, PTC disc thermistor for over-current and short-circuit protection PTC Leadless Discs PTC disc thermistor for heating elements and thermostat PTC Surface...
Relative humidity and temperature probe Panametrics aluminum oxide moisture probes have set the standard of performance and value in industrial moisture measurement for more than 40 years. In use, M Series moisture probes are coupled to Panametrics hygrometer consoles by an interconnecting cable. Ease of use, wide measurement range and rigorous...
Relative humidity sensor First, there was the EMD-2000 sensor, known for its tight accuracy and strong resistance to chemicals. The EMD-2000 which offers not only high accuracy but also improved hysteresis and a compact size. Both sensors are bulk polymer RH sensors that change resistance as the relative humidity changes. Now,...
Relative humidity transmitter for explosive areas The DewPro MMR 101 is a high temperature loop-powered moisture and temperature transmitter. Housed in a Type4X enclosure, featuring simple two-wire or four-wire connection, and suitable for temperatures to 150ºC, the MMR101 is designed to withstand the harshest environments. Applications include power...
Relative humidity, temperature and dew-point transmitter DewPro MMR 31 Moisture Transmitter The DewPro MMR 31 loop-powered mid-range moisture transmitter represents a simple, cost effective solution for mid-range moisture measurement. The MMR31 provides a wide range of process humidity measurements including relative humidity, dew point temperature, absolute...
Relative pressure transmitter The PTX 7200 Series combines modular design with the latest advances in ASIC technology and surface mount electronics. This provides a lightweight, highly reliable and cost-effective solution for a range of industrial pressure measurement applications including factory automation, test cell monitoring,...
Resistive temperature sensor (RTD) CALIBRATION IRTD Temperature Standards The intelligent resistant temperature device (IRTD) is a secondary standard with a completely self-contained measurement system, including electronics for calibration and temperature conversion. GE Kaye's IRTD provides ultra-high accuracy temperature data to your...
Resistive temperature sensor (RTD) RTD Element A ceramic substrate supports a structured platinum layer covered with glass. The connection lead contacts are shear force resistant. - Connection leads made of gold plated brass, allow problem-free soft solder. - Small dimensions available - High electrical insulation is guaranteed...
Resonant pressure transducer The use of resonant structures in pressure transducers has long been recognized as producing highly stable sensors. GE has developed this technology to produce a series of Resonant Pressure Transducers (RPT) using silicon to give high accuracy and stability with low manufacturing costs.
Rugged pressure transmitter Hammer Union Pressure Transmitter - PTX 661 Series The PTX 661 Hammer Union Pressure Transmitter has been designed for use in extremely harsh environments in both on-shore Oil Drilling operations where high shock and vibration is likely to be encountered. Industrial Pressure Transmitter The...
SMD relative humidity and temperature sensor The ChipCap series humidity sensor offers a new standard in the field of accurate relative humidity measurement. Based on a capacitive polymer sensing technology, this device offers signal conditioning and temperature compensation for a single SoC (System-on-Chip) solution. The device is very simple...
Soil moisture analyzer Speedy Soil Moisture Meter for roads, aggregates, sand and concrete The Large Speedy 2000 series of moisture testers combines time proven dependability of the pressure test procedure with the convenience of an electric balance. - Large Speedy vessel fitted with calibrated pressure gauge, electronic...
Stainless steel pressure sensor The UNIK 5000 is a high performance configurable solution to pressure measurement. The use of Druck silicon technology and analogue circuitry enables best in class performance for stability, low power and frequency response. The use of modular design and lean manufacturing techniques allow users to...
Surface mount combination sensor: pressure and temperature (thermistor) NPX1 Sensor The compact sensor combines pressure and temperature sensing capabilities within a single processor based sensor. - 12 bit ADC - 4k byte flash (E-ROM) - 2k ROM for user application - 128 byte RAM - 128 byte EEPROM - Battery management—minimizing power consumption. - Measure...
Surface mount piezoresistive pressure sensors NPP-301 Series Surface Mount Pressure Sensor The NPP Series features silicon pressure sensors in surface mount packages Features - Low-cost surface mount package: SO-8 - Wide operating temperature range: -40°F to 257°F (–40°C to 125°C) - Static accuracy <0.20% FSO maximum - Suitable for automated...
Temperature and carbon dioxide transmitter (CO2) The Ventostat 8000 Series represents a full range of wall mount CO2 and temperature transmitters with display options plus active humidity and temperature outputs
Temperature and carbon dioxide transmitter (CO2) The Telaire 7000 Series hand held indoor air quality monitors feature our patented absorption infrared technology. Accurately measures CO2 and temperature while calculating real-time ventilation rates. The Telaire 7000 Series also offers data logging and RH data gathering capabilities when purchased...
Thermal conductivity binary gas analyzer Wide Variety of Applications The TMO2-TC gas analyzer provides sensitive, accurate, online analysis of composition based on the thermal conductivity of gases in a mixture. It uses two ultrastable precision thermistors: one in contact with the sample gas and one in contact with a sealed or flowing reference...
Thermistor temperature probe The Thermometrics Type MA400 interchangeable temperature probes have been designed to provide high reliability and performance for temperature measuring and controlling instruments. The Series 400 temperature probes are based on our 2252 Ohm interchangeable curve. - ±0.10°C Interchangeability over...
Thermo-paramagnetic oxygen gas transmitter (O2) Accurate & Reliable Long-Term Measurement The XMO2 transmitter provides computer-enhanced, drift-free oxygen measurement in a compact, rugged, online transmitter. It can be used wherever accurate and reliable long-term oxygen measurement is critical to process and product quality. This includes inerting/blanketing...
Ultrasonic flow-meter for gas GS868 & XGS868 Flowmeter/Transmitter Measures Mass Flow Rate of Steam The DigitalFlow™ GS868 and XGS868i ultrasonic steam flowmeters solve the problems of pressure drop and rangeability found in other flowmeters by reducing operation, installation and maintenance costs. Our line of steam flow meters...
Ultrasonic flow-meter for gas Sentinel Series The Sentinel ultrasonic flow meters are specially designed for highest accuracy fiscal and allocation measurements of oil and gas. They offer reliable, and extremely accurate flow measurement of hydrocarbon liquids, liquified natural gas and natural gas.
Ultrasonic flow-meter for liquids PanaFlow Meter System - Integrated Ultrasonic Flowmeter main-panaflow-meter-flow The GE PanaFlowTM Meter System wetted ultrasonic flowmeter product for liquids, gases or steam that uses standardized flowmeter body designs with options for one or two-path ultrasonic transducers, and local or remote...
Ultrasonic flow-meter for liquids with integrated data-logger Fixed-Installation Flowmeter GE Panametrics’ DF868 ultrasonic liquid flowmeter is a fixed-installation meter based on our award-winning TransPort PT868 portable ultrasonic liquid flowmeter. The DF868 is available with two built-in measuring modes. Using clamp-on flow transducers, the DF868 flowmeter...
Ultrasonic flow-meter for LNG (liquified natural gas) The Bundled Waveguide Transducer (BWT) System, a technological innovation in ultrasonic flow measurement, is the key for flow measurement in Liquified Natural Gas (LNG) in large pipes. The robust BWT System is the proven solution for cryogenic LNG applications, including the outlet of liquefaction trains...
Vortex flow-meter PanaFlow™ Multivariable Flowmeter for Mass, Temperature, and Pressure PanaFlow’s multivariable design consists of a vortex shedding velocity sensor, an RTD temperature sensor and a solid-state pressure transducer that measures the mass flow rate of steam, gases and liquids. The PanaFlow vortex flowmeter...
Waterproof relative humidity and temperature transmitter EHRH Waterproof EHRH Relative Humidity Transmitter The Model EHRH Relative Humidity Transmitter is a waterproof RH sensing element and package which is ideally suited for monitoring relative humidity in high RH/harsh environment applications or where washdowns are required. The unit is designed for...
Wellhead pressure and temperature transmitter Wellhead Pressure/Temperature Transmitters - PTX 400 Series The PTX 400 series of pressure, temperature and combined pressure/temperature transmitters has been specifically designed for long term use in subsea locations. It enables accurate process measurements to be made directly on subsea wellheads...
Wetted ultrasonic flow-meter for liquids The GE Panametrics PanaFlowTM Meter System wetted ultrasonic flowmeter product for liquids, gases or steam that uses standardized flowmeter body designs with options for one or two-path ultrasonic transducers, and local or remote flowmeter electronics. The PanaFlow Meter System is designed for applications...
Wireless relative humidity and temperature data-logger The Protimeter HygroTrac is a simple and cost-effective system for remote environmental monitoring in buildings. Data can be viewed live over the internet showing parameters such as moisture content relative humidity and temperature. Set threshold alarms Receive alarm warning via email and...
Zirconia flue gas oxygen analyzer (O2) Accurate & economical combustion process monitoring The OxyTrak™ 390 ex-situ flue gas analyzer is ideally suited for measuring unburned oxygen levels in dirty, rugged combustion applications. A diffusion convection loop design provides high levels of accuracy with minimal service or maintenance required. -...
Zirconia oxygen analyzer (O2) The Series 351 zirconia oxygen analyzer is suitable for monitoring and controlling any variable gas stream or atmosphere that is clean and dry. Typical uses include oxygen-enriched air feed to furnaces, combustivity index of blended fuel gases and oxygen content during heat bonding of plastics. The...